This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
From other capitalisation: This is a redirect from a title with another method of capitalisation. It leads to the title in accordance with the Wikipedia naming conventions for capitalisation, or it leads to a title that is associated in some way with the conventional capitalisation of this redirect title. This may help writing, searching and international language issues.
If this redirect is an incorrect capitalisation, then {{R from miscapitalisation}} should be used instead, and pages that use this link should be updated to link directly to the target. Miscapitalisations can be tagged in any namespace.
Use this rcat to tag onlymainspace redirects; when other capitalisations are in other namespaces, use {{R from modification}}instead.
This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
This disambiguation page lists articles associated with the title Real. If an internal link led you here, you may wish to change the link to point directly to the intended article.
The GT 350 made its debut in the "sportsroof" fastback model of the first generation Ford Mustang in 1965. Produced through 1966, these were the smallest and lightest of the GT 350 models. Work started at Shelby American when its Ford-powered AC Ace-based two-seat 289 AC Cobra sports car production was wrapping up and the 427 cu in variant was beginning. Both the AC and the Shelby Mustang use the Cobra emblem, similar paint scheme, and the optional "Cobra" valve covers installed on many GT350s that were part of a marketing tie-in by Shelby, as well as one of his iconic symbols. All 1965–66 cars had the Windsor 289 cu in (4.7 L) HiPo K-Code 271 hp (202 kW; 275 PS) V8 engine, modified with a large 4-barrel Holley 725 CFM carburetor to produce 306 bhp (310 PS; 228 kW) at 6,000 rpm and 329 lb⋅ft (446 N⋅m) of torque at 4,200 rpm.[2][3] Marketing literature referred to this engine as the "Cobra hi-riser" due to its high-rise intake manifold. Beginning as a stock Mustang with a 4-speed manual transmission and 9-inch live rear axle, the cars were shipped to Shelby American, where they received the high-rise manifolds, Tri-Y headers, and were given larger Ford Galaxie rear drum brakes with metallic-linings and Kelsey-Hayes front disc brakes.
The 1965 GT350 was built for the race track, not comfort or ease of driving. A total of 34 race-spec "GT350R" cars were built specifically for competition use under SCCA rules, and the model was the B-Production champion for three straight years.[4] The 1966 GT350 was more comfortable for casual drivers, including a rear seat, optional colors, and an optional automatic transmission. This trend for more options and luxuries continued in the following years, with the cars becoming progressively larger, heavier, and more comfortable, at the cost of their competitiveness. By 1969 Carroll Shelby was no longer involved in the Shelby GT program, and the design was done in-house by Ford, with the 1969 GT350s and GT500s reduced to being largely styling modifications to a stock Mustang.
The 1965 and 1966 GT350s were delivered from Ford's San Jose Assembly Plant for modification by Shelby, originally in Venice Beach and later at Los Angeles International Airport. San Jose cars carried an "R" in the Ford VIN denoting that facility.[5] The only year that Shelby Mustangs from the 1960s came from another plant was 1968, where they came from New Jersey, "T" in the VIN,[6] and were modified by A.O. Smith.
All 1965 GT350s were painted in Wimbledon White with Guardsman Blue rocker stripes. Approximately 28% of the 562 1965 cars built were delivered to the dealer with the optional Le Mans stripes, a pair of broad matching blue stripes that run the length of the entire car from the hood through the roof and the tail.[7] Today, it is difficult to find a GT350 without them.[citation needed]. In subsequent years white stripes were also used with dark colored body paint.
Many early 1965 cars had the battery relocated to the trunk, which was changed mid-year due to complaints of fumes, and had over-rider traction bars, relocated A-arms, as well as other modifications. A 4-speed Borg-Warner T10 manual was only transmission available. Dual exhausts exited out the sides via glasspackmufflers (with fourteen cars being equipped with rear-exiting exhausts to meet state regulations for sales in certain areas). For this one year, the GT350 also had special 130 mph (210 km/h)-rated Goodyear "Blue Dot" tires, named for the prominent blue dot on each sidewall. The 1965 GT350 had a full-size spare tire mounted in place of rear seats, making it a 2-seat-only vehicle (to qualify as a "sports car" under SCCA regulations), and rode on either silver-painted steel wheels or special cast-magnesium center "Cragar Shelby" 15-inch rims with chromed center caps marked with a stylized "CS". Total 1965 model year production was 562 units.
For 1966, the GT350 lost its Mustang tag and was marketed simply as the Shelby GT350.[8] The new model year also saw the introduction of non-white colors, including blue, red, green, and black. Other changes included special rear quarter-panel windows replacing the factory extractor vents, functional brake scoops on each side, and optional SelectShift 3-speed automatic, as well as an optional Paxton supercharger. The battery was no longer relocated to the trunk for 1966, and the over-rider traction bars were discontinued. The normal factory fold-down rear seat was optional. While early 1965 cars had black engine blocks, 1966 and later engines were painted regular factory Ford dark blue. The 1966 models came with a dual-exhaust exiting in the rear.
The first 252 GT350s for 1966 began as 1965 Mustang K-Code Fastbacks that had been specifically ordered by Shelby American for conversion into 1966 GT350s; these all had 1965 bodies.[citation needed] They were received in blocks of cars; thus Shelby VINs do not correspond in numerical order to Ford factory VINs.
As a promotional move, Ford leveraged its role as the major shareholder of Hertz to persuade the rental car giant to purchase 1,003 fastbacks, including two prototypes. Four "experimental" GT350 convertibles were also built for test purposes in anticipation of a 1967-1/2 convertible offering.[9] A small number of the consumer sales 1966 models were factor fitted with Paxton superchargers, but not the No-Spin limited slip differential, for an additional $670, (~$6,292 in 2023) the engine was rated at 440 hp (328 kW).[10][11][12] Total production for 1966 was 2,378 units, including two prototypes and four drag cars, with 1,372 sold to the general public.
The sales arrangement with Hertz for ~1,000 GT350s to be added to its rental fleet included the proviso that after their rental lives were finished the cars would be returned to Ford, refurbished, and sold to the public as "GT350H" models.[citation needed] Most Hertz cars were black with gold LeMans stripes and rocker panel stripes, although a few were white with blue stripes. The first 85 Hertz cars were available with four-speed manual transmissions and Hertz advertised them as "Rent-a-Racer" cars.[13] During rental, these cars were sometimes used as production class cars at SCCA events, and were rumored to have been returned to Hertz with evidence of roll bars being welded in.[13]
Ford pushed another 800 models on Hertz with black paint, gold stripes and black interior, as well as automatic transmissions.
When the Hertz cars were returned to Ford to be prepared for sale to the public, high-performance racing parts were often "lost" (presumably at the manufacturer) before final sale.[14]
For 1967, the GT350 carried over the K-Code high performance 289 with a 'COBRA' aluminum valve cover. The GT500 was added to the lineup, equipped with a 428 cu in (7.0 L) "Ford Cobra" FE Series Cobra Jet V8 engine with two 600 CFM Holley four-barrel carburetors mated to a mid-rise aluminum intake manifold.
Documented plans to introduce a convertible mid-production year were shelved due to supply, production and financial problems that happened as soon as the first cars started to arrive at Shelby's Los Angeles facility in September. By October 1966, Ford took control of engineering and purchasing.[15]A.O. Smith was tapped to fix the fitting of fiberglass components.[16] In May 1967 the decision was made to terminate the California-based Shelby operation. On August 18, 1967, a small carryover Shelby staff, along with the remaining engineering cars, was sent to Ionia, Michigan; Shelby personnel had substantially less involvement after this time.
Notable cars for 1967 include:
0100, the first GT500 built.
0131, the only Shelby GT coupe built ("Little Red'), which was the precursor to the '68 California Special. The original GT500 "L'il Red" was rediscovered in a Texas farm field in March 2018[17]
0139, the only[18] Shelby GT500 convertible built (in 1967.[19]
Cars 0100, 0131 and 0139 were the first big block Shelby GT cars ordered and built.
One 1967 Fastback was updated to a GT500 equipped with a 427 FE GT40 racing engine producing 650 hp (485 kW), and was known as the "Super Snake"[20] The car was capable of speeds over 150 mph (241 km/h); hitting 170 mph (274 km/h) during a demonstration (by Shelby himself) of Goodyear's Thunderbolt tires.[21] No cars other than the prototype were built due to limited interest. The car sold at Mecum's 2013 Indianapolis auction for $1.3 million.[20]
In 1967 Shelby American built 26 K-code Mustang Coupes to the FIA's Group 2 specification. This allowed the cars to race in the SCCA A-Sedan class and the Trans Am series. The 1967 Mustang notchback Group II sedan was Shelby American's competition model for 1967. The same rule that allowed the 1965 GT350 to compete in SCCA's B Production class - no rear seats - effectively kept the Shelby Mustangs out of the Trans-Am series.[22]
For 1968, the Cobra name was applied to both models, which were marketed as the Shelby Cobra GT350 and the Shelby Cobra GT 500.[23] The solid lifter K-code engine was discontinued by Ford, so Shelby used the hydraulic lifter 230 hp 302. It produced 250 HP with the high rise intake but was not equipped with Shelby headers in order to make room for power steering. The early 1968 GT500 used the Shelby installed 428 Police Interceptor with a single four-barrel carburetor rated at 360 HP.
The 1967 redesign made for a heavier Mustang, along with a longer, fiberglass hood, and new front and rear fascias. The design of the original 1965 version was evident, but these styling upgrades gave the car a more aggressive appearance and achieved Carroll Shelby's goal of differentiating his car from the Mustang on which it was based. The separate high-beam headlamps in the grille added more character, while a thin, chrome front bumper sat below a mesh grille with the classic "Shelby GT350" logo in place (except for the very early cars). The small hood scoop was there to deliver fresh air to the engine. Shelby also included new, horizontal sequential taillights (sourced from a '67 Cougar in 1967 and a '65 Thunderbird in 1968) and an integrated Kamm-type rear spoiler. Functional rear brake-cooling scoops adorned the rear quarter panels. Ten-spoke, fifteen-inch, cast-aluminum rims were the wheel choice with Goodyear white-lettered radials.
The GT350 was available with air conditioning and an AM/FM radio. The steering wheel was a wood-rimmed and satin-trimmed design with the classic Shelby logo in the center. Behind this wheel was a very classy-looking set of gauges. A 140-mph speedometer and a whopping 8,000-rpm tachometer were joined along with a smaller analog clock, fuel level, water temperature, and oil pressure gauges.
The 1967 GT350 came with an iron-block, 289-cubic-inch (4.7-liter) V-8 rated at 306 horsepower and 329 lb-foot of torque. For a pushrod design, the GT350 revved relatively high, with the horsepower peak not in full swing until the 6,000-rpm redline. 1967 was well before modern fuel injection came about, and the car used a single Holley four-barrel carburetor. The true dual-exhaust with H-shaped crossover system came standard with low restriction mufflers and chrome exhaust tips. Power was routed to the ground through a sturdy, four-speed manual transmission with a single, dry-disc clutch. A three-speed automatic was made available as an option. Rear-end ratios were 3.89-to-1 for the four-speed manual and 3.50-to-1 for the automatic. Acceleration was impressive, with a 0-to-60 time of around seven seconds and a top speed of 140 miles per hour (230 km/h).
Braking duties were handled by 11.3-inch discs up front and drums in the rear. Power assist was standard. The front suspension consisted of unequal-length control arms, coil springs, adjustable tube arms, and an anti-sway bar. Out back was a live axle, with multi-leaf, semi-elliptical springs and tube shocks. The steering was a power-assisted recirculating ball design.
In 1968 the 289ci V8 was replaced with a factory 302 V8 using an aluminum Cobra intake manifold and Holley 600 cfm carb. The 302 had less racing parts than the 289 and was rated at 250 hp. A Paxton Supercharger was available that was rated at 33 hp at 5,200 rpm.[citation needed]
The 1967 Shelby G.T. 500 was the first model built in the Shelby G.T. 500 range. It is based on the 1967 Mustang and is equipped with a FE 428 cu in (7.0 L) Police-InterceptorV8 engine topped with an aluminum mid-rise intake and 2X4-barrel 600 CFMHolleycarburetors producing 355 bhp (360 PS; 265 kW) at 5,400 rpm and 420 lb⋅ft (569 N⋅m) at 3200 rpm of torque.[24] Two thousand forty eight were produced in 1967.
Several body parts of the G.T. were made of fiberglass including the front-end, hood, rear tail light panel, deck lid, quarter panel extension, and side scoops.
Beginning in April 1968, Ford began factory installing a version of the 428 engine known as the Cobra Jet. This new engine featured a unique, 16-bolt exhaust flange. The GT500 was subsequently known as The Cobra GT500 KR. The initials KR stood for "King of the Road." Ford rated the Cobra jet at 335 hp (250 kW), but with 440 lb⋅ft (597 N⋅m) of torque at 3,400 rpm, although the horsepower was considered significantly underreported.[citation needed] Shelby's KR engine was left stock adding die-cast aluminum valve covers with "Cobra Lemans" to note Ford's FE engine family victory over Ferrari at Le Mans in 1966 and 1967.
The GTs lost their Cobra tag for 1969, and once again were marketed simply as the Shelby GT350 and Shelby GT500.[25] The GT350 and GT500 for the 1969 model year received an extensive face lift, the body alone increasing in length by 4 inches (100 mm) with some reaching 10 inches (250 mm). Ford was involved with design and style decisions, with Shelby having little input. The GT350 was now equipped with a 351 cubic-inch V8. Carroll Shelby terminated his agreement with Ford in the summer of 1969.
No production of 1970 Shelby GT350 and 500 models was undertaken; however, unsold 1969 models were given 1970 vehicle identification numbers under FBI supervision.[14] The 1970 models had two cosmetic changes, a front chin spoiler and two black hood stripes. The rest of the changes had to do with emissions. The GT500 had the carburetor modified and marked "ed" (edited) on tag. The distributor in both the GT 350 and GT500 was changed to a 1970 version.[14] A total of 789 were re-VIN'd.[14]
This program unpacks Playstation 3 Theme files (.p3t) so that you can touch-up an existing theme to your likings or use a certain wallpaper from it (as many themes have multiple). But remember, if you use content from another theme and release it, be sure to give credit!
Download p3textractor.zip from above. Extract the files to a folder with a program such as WinZip or WinRAR. Now there are multiple ways to extract the theme.
The first way is to simply open the p3t file with p3textractor.exe. If you don’t know how to do this, right click the p3t file and select Open With. Alternatively, open the p3t file and it will ask you to select a program to open with. Click Browse and find p3textractor.exe from where you previously extracted it to. It will open CMD and extract the theme to extracted.[filename]. After that, all you need to do for any future p3t files is open them and it will extract.
The second way is very simple. Just drag the p3t file to p3textractor.exe. It will open CMD and extract the theme to extracted.[filename].
For the third way, first put the p3t file you want to extract into the same folder as p3textractor.exe. Open CMD and browse to the folder with p3extractor.exe. Enter the following: p3textractor filename.p3t [destination path]Replace filename with the name of the p3t file, and replace [destination path] with the name of the folder you want the files to be extracted to. A destination path is not required. By default it will extract to extracted.filename.
_(cropped).jpg)
_(cropped).jpg)
_(cropped).jpg)
_(cropped).jpg)
.jpg)
_(cropped).jpg)
.jpg)
